EVO LED SET 3-100 1.5 | LAMP SUSPENSION | DIMMER AND CABLE | 200W

Product Description

The SANlight EVO 3-100 1.5 is the perfect LED set for anyone who wants to achieve optimum results at a depth of 1 metre. For areas of 100x100cm, two of these lamps are unbeatable – but a single one is also sufficient, for example for growing cuttings or mother plants. With an impressive light output of 545 µmol/s and a flexible dimmer, you can adjust the light precisely to the needs of your plants and save on electricity costs at the same time. The included mains connection cable makes the EVO-Series Sets a must-have allrounder for succesful indoor-growing.

PRODUCT DETAILS

Technical Details:

– Power consumption: 200 watts
– Power factor: > 0.95
– Input voltage: 100 – 240 V
– Length: 818 mm
– Width: 291 mm
– Height: 112 mm
– Photon flux density: 545 µmol/s
– Efficiency: 3 µmol/J
– Emission wavelength: 400 – 780 nm
– Weight: 4.1 kg
– Protection class: IP65
– Max. rel. humidity: 99 %
– LM90: > 90,000 h

Advantages of EVO LED sets:

Broadband light spectrum and high homogeneity

SANlight has identified the perfect broadband light spectrum with exactly the right ratio of Far Red to Red for photomorphogenesis in its wide-ranging series of tests with fast-growing and light-hungry plants. The emission wavelength ranges from 400 – 780 nm, with an extremely high efficiency of over 3 µmol/J! All this enables an increase in the quantity and quality of indoor grow yields. Each individual LED in the EVO 3-100 1.5 is fitted with secondary optics, which not only protect the chip from soiling and oxidation, but also enable extremely homogeneous illumination thanks to their light-directing properties. In contrast to unprotected LEDs, these optics are easy to clean and therefore guarantee trouble-free operation with high light output for a long time.

Quality LEDs, clever mounting options and dimmability

SANlight has also spared nothing when it comes to LED quality. The LEDs from Seoul Semiconductor are particularly robust, highly efficient and have a particularly long service life. SANlight specifies the 90 % light output (LM90) as 90,000 hours. The tilt function (tilted suspension of the lamp) saves a lot of space at the top. The elongated modules can be mounted on the side next to the ventilation system. Perfect illumination is achieved by angling the lamp

CONTENT

2x SANlight EVO 3-100 1.5 with 200W each
2x SANlight power cable
2x SANlight magnetic dimmer
2x SANlight hanger (load capacity 34 kg each)